High-performance 19.0-inch panel Features: Engineered to operate reliably under extreme conditions. Supports a very wide operating temperature range from -30°C up to 85°C. Delivers a solid brightness. Treated with an anti-glare 3H hard coating surface to minimize environment reflections on the factory floor. The module incorporates a power-efficient white LED (WLED) backlight system and utilizes a high-speed 2-channel 8-bit LVDS interface via a 30-pin Hirose connector to ensu

Acoustic Sounder SG21 with contact pins l=700 Features: Pressure chamber loudspeaker (Horn speaker) Mounting bracket Control and amplifier electronics with three signals All buttons are switched against +24V

MVB / Ethernet Converter Features: 1 × MVB interface (in EMD version, doubled line) 1 × Ethernet interface Power supply voltage 24 V DC ERTMS/ATO SW interface Complies with EN 50155 standard MVB interface complies with IEC 61375-3-1:2012 standard

Industrial circular connector featuring a reverse bayonet coupling system Features: Series: RF CVBS (version with a rubber-covered plug shell). Style (06RA): Straight plug with a right-angle adapter or backshell for hose/conduit. Quick Connection: 3-ramp reverse bayonet coupling system with stainless steel wear rollers for high vibration resistance. Applications: Widely used in harsh environments, especially in the railway industry, heavy-duty vehicles, and industrial automat

Wirebound resistor Features: Power Rating: 150 Watts (a massive thermal capacity for continuous heat dissipation). Tolerance: ±5% (standard margin for industrial power resistors). Dynamic braking resistors for frequency inverters and electric motor drives. Load banks and quick-discharge circuits for large capacitor banks. Industrial traction equipment (elevators, cranes, and hoists).

Metalized Polypropylene Film Capacitor Features: E62 (Universal AC/DC) MKP (Metallized Polypropylene Film) Capacitance: 20 µF Overpressure disconnector (break-action mechanism) Operating Temperature: -40 °C to +85 °C

High-performance IGBT module Features: Designed for advanced power electronics applications. Critical component: Used in power conversion and control systems. Robust performance: Ideal for industrial and electrical engineering environments. Efficient power management: Essential for reliable power switching capabilities. Lead-free and RoHS-compliant: Semiconductor device ensuring environmental compliance. Advanced design: Addresses heat dissipation, switching efficiency, and c

Semi-structural, two-part system of polyurethane adhesive and sealant Features: Good Adhesion Property Good Impact Strength Good Sagging Resistance Impact Resistance Long Pot Life No Shrinkage Available Sizes 346 ml catridge (version Körapur 840/20) 372 ml catridge (version Körapur 840/45) 540g catridge (version Körapur 840/2) 5kg bucket and 30kg bucket ***require Köracur TH 650 Hardener (Part B), sold in 1 kg or 5 kg cans, to achieve the correct mixing ratio by weight (5:1)

2.5” SATA SSD 3SE4 Features: 2.5” SATA III solution for industrial field DRAM-less, high-level data integrity Excellent IOPS boosts system performance Built-in thermal sensor Supports S.M.A.R.T., TRIM and NCQ Supports wide temperature from -40°C to 85°C

100% synthetic biodegradable lubricant (old PN: BIO NATUR WF OIL 68) Features: Compliant with the NF-EN 16028 standard and manufacturer requirements (REBS). Reduction in overall maintenance costs: thanks to its specific additive package, CIMEA WF OIL 68 reduces wear on rails and wheel flanges. The polar nature of the oils used ensures optimal adhesion and reduced consumption. excellent UV resistance prevents gumming on the rails. Low-temperature use: thanks to its low pour po